• Transperent building facade with glass surfaces up to 2.5 x 5.0 m
  • Slim profile view width of 50 and 60 mm
  • Profiles in steel or stainless steel
  • Suitable for the installation of double and triple insulating glass up to 70 mm element thickness
  • Roof glazing from 7º to 90º inclination possible
  • Post mullion-mount or panel design
  • New high-strength profiles: manufactured according to EN 1090 with excellent static values ​​up to Ix = 1.965cm4
  • New high-strength profiles: rod length 8 or 10 m for cross-sectional use
  • New high-strength profiles: sharp-edged with only 2mm edge radius
  • New heavy-duty T-connector: the bars are simply suspended after post installation
  • New heavy-duty T-connector: For filling element weights to 1900 kg tested according to EN 1990

Jansen VISS SG – System solution for structural glazing façades
Based on the tried and tested VISS system solution, a high-tech façade in the structural glazing design can be executed efficiently and simply with VISS SG. With glass surfaces up to 2.5 x 5.0 m, the transparency of the building envelope is visibly increased. Variable glass anchors allow the installation of double or triple insulating glass with an element thickness of up to 70 mm. Even roof glazing with a structural glazing design can be easily realized with VISS SG. The Jansen VISS SG system can be combined with any VISS profile of the widths 50 and 60 mm as well as with the carrier-independent VISS Basic solution.